Find Steel Shutter Door Manufacturering Equipment, Shutter Door Equipment, Shutter Door Rolling Forming Machinery on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Prepainted Steel Coil > Steel shutter door manufacturering equipment

Steel shutter door manufacturering equipment

  • Steel shutter door manufacturering equipment
  • Steel shutter door manufacturering equipment
  • Steel shutter door manufacturering equipment

Steel shutter door manufacturering equipment

    Payment Type: L/C,T/T,Paypal,Western Union
    Terms of Trade: FOB,CFR,CIF
    Min. Order: 1 Set/Sets
    Delivery Time: 40 Days
    Packaging: covered with plastic films
    Productivity: 40sets Per Month
    Transportation: Ocean
    Place of Origin:  China Hebei
    Supply Ability: 40sets Per Month
    Certificate: ISO9001
    HS Code: 8455221000
    Port: TIANJIN

Basic Info

Model No.: shutter door

Product Description

Rolling shutter doors forming machine

People are known shutter door as a roll up door.A roller shutter door forming machine is designed to produce horizontal roller shutter door slats out of galvanized or prepainted steel .Shutter door are used a lot for shops and workshops.A rolling shutter door or roller shutter door is a type of door that consists of many horizontal slats hinge together and the door opens and closes by raising up or lowering down along a rolling shutter door track or guide rails.


The final product can be cut as per set length controller,and the length is automatically measured by encoder.When final product reached set length,machine will stop to cut the sheet automatically.Finish thhis action,the machine will run again continuously


shutter door manufacturing machine


1.Profile of shutter door design:

shutter door forming machine

2.Working process of rolling up door forming machine

shutter door forming machine

3.Technical details:


1.Un-coiler

Capacity: 3 tons

Material: #45 steel quenched

Power:2.2KW,03 Phase, 220/380V, 50HZ/60HZ

Method of open and close of segments: manual

Number of segments:4 pieces

Range of segment expansion: ø480- ø520

Inner diameter of coil: ø508

Maximum outer diameter of coil: ø1,300

Feeding speed:25m/min(transducer control)

2.Main roll former

Stations: 12

Rollers material: CR 15, HRC 60. Chrome coated: 0.03-0.05mm, Strength (MPA): 70 tons, 800 MPA

Shaft: diameter 50mm, material is #45 steel. Quenched hot treatment. Strength of the main shaft (MPA): 70 tons, 650MPA

Bearing brand: FAG Germany

Main motor: 7.5KW, 380/220V, 50/60HZ, 3 Phases (OMD Brand)

Transmission by gear

Station material: cast steel

Machine is equipped with cooling system

3.PLC control cabinet

Touch screen brand: Delta

PLC brand: Siemens

Inverter brand: Siemens

Main components for low pressure electricity: Schneider Germany

Encoder: Omron

Sensor: Balluff B+F brand

Control motion/production process: Un-Coiler---12 stations roll forming machine---Hydraulic cutting by servo---output table

4.Cutting platform

Cutting type: hydraulic cutting with servo motor

The material of knives: CR12MOV; heat treatment HRC 55-60, Quenched; the Strength in MPA: 950

Servo motor: 1.5KW, 220V

Tolerance of length: ±0.5mm

Action: the host does not stop, servo track to cut off

5.Hydraulic Station parameter

Hydraulic Motor: 5.5KW, 220V/380V, 50HZ/60HZ, 3 Phases, Siemens brand

Hydraulic pump: Yuken brand Taiwan

Hydraulic valve: Rexroth Germany

Hydraulic cylinder: China

The Hydraulic station have Accumulator

The stations have 1 valves

6.Output table

Length: 8 meters

Drive type: rollers

7.Input material

Material: galvanized sheet

Galvanized steel: 0.8-1.0mm

8.Dimension (L*W*H)

Roll forming machine space: 6.4m*1.55m*1.36m

Working space:12m*3m*3m

9.Working speed

15-18m/min (including cutting)

10.Include the following normal consumable spares

Bearing in main shaft: 10 pcs

Other bearing (sub-rollers): a few

Limit switch:2 pcs

Low pressure electricity: a few

Relay:8 pcs

Oil tube: 2 pcs for each tool

Connector: a few

Cutting knives: 2 extra

Upper shaft and down shaft: 2 pieces

Station: 1 pieces

Gear: 2 pieces



Botou Golden Integrity Roll Forming Machine Co.,Ltd

 

Botou Golden Integrity Roll Forming Machine Factory is located in "the town of casting molds", enjoying convenient and highly effective transportation for being close to Tianjin Port, No.104 National Way, No.106 National Way and Jingjiu Railway.

Our technical force is abundant. Production equipment is advanced, detection means is complete.


We specialize in the professional production of various types of roll forming machines, and the development and production of fully automatic intelligent control roll forming machines of C-shaped steel and dust collector anode plates, and other equipment. On the basis of traditional roll forming machines, we also develop new computer fully automatic roll forming machines, roof and wall panel forming machines, glazed tile forming machines, floor bearing plate forming machines, high-speed barrier devices, double color steel tile molding machines, C and Z steel machines, arch appliances, sandwich composite plate machines, shearing machines, bending machines, and heat insulation sandwich composite machines. Our products have reached the advanced level in the same industry.


As beautiful appearance, reasonable structure, and tile-based standards of our products, they are popular among new and old customers. Products are sold to domestic enterprises.


Our factory has highly qualified and experienced professionals and highly skilled construction workers to serve you. Our factory can design and produce various kinds of special-shaped cold-formed molding equipment for different needs of the users. You are welcome to contact us for more information.

Company Info

  • Company Name: Botou Golden Integrity Roll Forming Machine Co.,Ltd
  • Representative: YANG JIE
  • Product/Service: Roof Panel Roll Forming Machine , Cz Purlin Roll Forming Machine , High Way Crash Barrier Roll Forming Machine , Light Gauge Framing Machine , Roller Shutter Door Forming Machine , Double Layer Roll Forming Machine
  • Capital (Million US $): 500000RMB
  • Year Established: 2010
  • Total Annual Sales Volume (Million US $): US$2.5 Million - US$5 Million
  • Export Percentage: 51% - 60%
  • Total Annual Purchase Volume (Million US $): Below US$1 Million
  • No. of Production Lines: 15
  • No. of R&D Staff: 5 -10 People
  • No. of QC Staff: 5 -10 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 5,000-10,000 square meters
  • Factory Location: ECONOMIC DEVELOPMENT ZONE ,BOTOU CITY
  • Contact Person: Mr. JIE YANG
  • Tel: 86-318-8189095
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters